View MC100LVEL31_84919.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
D Flip Flop With Set and Reset
The MC100LVEL31 is a D flip-flop with set and reset. The device is functionally equivalent to the EL31 device but operates from a -3.3V (or +3.3V) supply. With propagation delays and output transition times essentially equivalent to the EL31, the LVEL31 is ideally suited for those applications which require the ultimate in AC performance at low power supply voltages. Both set and reset inputs are asynchronous, level triggered signals. Data enters the master portion of the flip-flop when clock is LOW and is transferred to the slave, and thus the outputs, upon a positive transition of the clock.
MC100LVEL31
8 1
* * * *
475ps Propagation Delay 2.9GHz Toggle Frequency 75k Internal Input Pulldown Resistors >2000V ESD Protection
D SUFFIX PLASTIC SOIC PACKAGE CASE 751-05
LOGIC DIAGRAM AND PINOUT ASSIGNMENT
S
1
S
8
VCC
D
TRUTH TABLE S L L H L H R L L L H H CLK Z Z X X X Q L H H L Undef
D
2
D Flip Flop
7
Q
L H X X X
CLK
3
R
6
Q
R
4
5
VEE
Z = LOW to HIGH Transition
10/96
(c) Motorola, Inc. 1996
3-1
REV 0
MC100LVEL31
DC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND)
-40C Symbol IEE VEE IIH IIL Characteristic Power Supply Current Power Supply Voltage Input HIGH Current Input LOW Current 0.5 -3.0 Min Typ 30 -3.3 Max 35 -3.8 150 0.5 -3.0 Min 0C Typ 30 -3.3 Max 35 -3.8 150 0.5 -3.0 Min 25C Typ 30 -3.3 Max 35 -3.8 150 0.5 -3.0 Min 85C Typ 32 -3.3 Max 38 -3.8 150 Unit mA V A A
AC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND)
-40C Symbol fMAX tPLH tPHL tS tH tRR tPW tr tf Characteristic Maximum Toggle Frequency Propagation Delay to Output Setup Time Hold Time Set/Reset Recovery Minimum Pulse Width CLK, Set, Reset Output Rise/Fall Times Q (20% - 80%) CLK S, R Min 2.7 Typ Max Min 2.9 0C Typ Max Min 2.9 25C Typ Max Min 2.9 85C Typ Max Unit GHz ps 365 385 150 250 400 600 120 220 320 465 475 0 100 200 580 620 365 385 150 250 400 600 120 220 320 465 475 0 100 200 580 620 375 395 150 250 400 600 120 220 320 475 485 0 100 200 590 630 415 435 150 250 400 600 120 220 320 530 525 0 100 200 630 670 ps ps ps ps
MOTOROLA
3-2
ECLinPS and ECLinPS Lite DL140 -- Rev 3
MC100LVEL31
OUTLINE DIMENSIONS
D SUFFIX PLASTIC SOIC PACKAGE CASE 751-05 ISSUE P
-A- B
M 8 5 X 45 _
J
1 4
4X
-B-
M_ G F
NOTES: 1. DIMENSIONS A AND B ARE DATUMS AND T IS A DATUM SURFACE. 2. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 3. DIMENSIONS ARE IN MILLIMETER. 4. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 5. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 6. DIMENSION D DOES NOT INCLUDE MOLD PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A B C D F G J K M P R MILLIMETERS MIN MAX 4.80 5.00 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.18 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50
P
0.25 (0.010)
M
-T-
8X
C
SEATING PLANE
D 0.25 (0.010)
M
K
TB
S
A
S
ECLinPS and ECLinPS Lite DL140 -- Rev 3
R
3-3
MOTOROLA
MC100LVEL31
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 or 602-303-5454 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com
JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-81-3521-8315 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298
MOTOROLA 3-4
*MC100LVEL31/D*
MC100LVEL31/D ECLinPS and ECLinPS Lite DL140 -- Rev 3

▲Up To Search▲

Price & Availability of MC100LVEL31

	To Download MC100LVEL31 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .